Raymond Mill

Raymond grinder produced by our company is mainly used to grind non-inflammable and non-explosive materials with Mohs hardness below 7 and moisture content below 6% such as barite, calcite, potash feldspar, talcum, marble, limestone, ceramic, glass, etc. Raymond grinder can be used in mining, chemical industry, construction materials, metallurgy and so on. The final products can be adjusted freely from 100 mesh to 425 mesh.

Working Principle of Raymond Grinder:

Firstly, raw material is crushed by jaw crusher to the size required, then elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between the ring and rollers to accomplish the grinding. After grinding, the rough materials will be recycled by the air from the fan back into the grinding chamber for regrinding and the fine powders are blew into the cyclone and poured out through the output-powder pipe as the final products.

Technical Data:

Model	Roller			Ring		Max.Feed size (mm)	Fineness of product (mm)	Power for Machine (Kw)	Capacity(t/h)	Weight(t)
	NO.	Dimension(mm)	Height(mm)	Inside Diameter(mm)	Height(mm)
3R2115	3	210	150	630	150	15	0.44-0.165	15	0.4-1.6	3.6
3R2615	3	260	150	780	150	20	0.44-0.165	18.5	0.8-2.5	4.2
3R2715	3	270	150	830	150	20	0.44-0.165	22	0.9-2.8	4.8
4R3016	3	300	160	880	160	20	0.44-0.165	30	1.2-3.5	8.5
4R3216	4	320	160	970	160	25	0.44-0.165	37	1.8-4.5	15